CCTV Supply and Installation at ACS Manufacturing Corporation. Introduction In an era where workplace safety, security, and monitoring have become vital components of industrial operations, companies are increasingly turning to advanced surveillance …
Starlink Supply and Installation at Getafe Bohol Residential Property.
Introduction
In an era where connectivity drives progress, even the most remote areas deserve reliable internet access. At Installersph IT Solutions, our mission is to bridge the digital divide by bringing high-speed internet to places where traditional ISPs fall short. This article details our latest project: a successful Starlink internet installation in the remote mountain area of Getafe, Bohol. It highlights the scope of our service, the logistical efforts involved, and the technological solutions implemented to ensure the client receives optimal connectivity.
Installation Video
Project Background
Located in the northern part of Bohol, Getafe is a municipality known for its serene environment, scenic coastal landscapes, and rural settlements. While beautiful and tranquil, many parts of Getafe—especially in the mountainous regions—struggle with access to basic internet services due to terrain and infrastructure limitations.
Our client, situated in one of these remote highland areas, sought a reliable internet solution that could support both personal and communal use. Starlink, a satellite-based internet service developed by SpaceX, was chosen as the best fit due to its ability to deliver high-speed internet even in geographically isolated locations.
Service Summary
The following services were provided as part of the project:
- Installation of Starlink Satellite Internet Equipment
- Configuration and Registration of the Starlink System
- Shielded CAT6 Cabling from the Starlink Router to an External Peso WiFi System
Travel and Logistical Effort
The project began with our team traveling from Cebu to Bohol, crossing the sea to fulfill the client’s request. This journey alone demonstrates our company’s commitment to extending services beyond metropolitan zones and into more remote locations where technological access is limited.
Upon arrival in Getafe, our team navigated several kilometers into a wide, elevated mountain area. The remote location posed certain challenges, such as limited cellular coverage, rough terrain, and logistical constraints for equipment transport. However, with careful planning and dedication, we reached the installation site with all necessary tools and components.
Site Assessment and Installation
Once on-site, a thorough assessment was conducted to determine the most suitable locations for the Starlink satellite dish, router, and cable routing.
1. Mounting the Satellite Dish
The Starlink satellite dish was mounted on the roof of the client’s residence. The elevated position was chosen to maximize signal reception and avoid obstructions from nearby trees or structures. Given the rural setting and potential environmental exposure, extra care was taken to ensure the mounting was secure and weather-resistant.
Using appropriate mounting brackets and tools, the dish was firmly attached to the rooftop. We ensured proper alignment by allowing the Starlink system’s built-in motors and software to automatically orient the dish for optimal satellite signal reception.
2. Setting Up the Router
The Starlink router was installed inside the house, where it would be safe from environmental elements and accessible for users. Placement within the home was carefully selected to allow a strong internal Wi-Fi signal while remaining close enough to the dish to maintain signal integrity via the supplied Starlink cable.
The router setup was straightforward, thanks to Starlink’s plug-and-play design. However, proper network configuration and registration were crucial to activating the service. Our technicians connected to the router interface, walked through the registration process, and ensured that the system was fully operational with stable satellite communication.
3. Registration and Configuration
Part of our service included registering the Starlink system under the client’s account. This involved:
- Connecting the router to the Starlink network
- Creating or logging into the Starlink user portal
- Activating the service
- Confirming signal strength and system diagnostics
We verified the successful registration by conducting speed tests and connectivity checks. The system reported strong signal strength and low latency, confirming that the installation site had suitable satellite coverage.
Extending Connectivity: Shielded CAT6 Cabling to Peso WiFi
In addition to the Starlink setup, the client requested a connection between the Starlink router and an external Peso WiFi system located outside the house.
While we were not responsible for the Peso WiFi device itself, we handled the structured cabling necessary to connect it. A shielded CAT6 cable was used for this task to minimize signal degradation over the distance and ensure electromagnetic interference (EMI) resistance, especially important in open rural environments.
The cable was routed:
- From the indoor Starlink router
- Through weatherproof conduits
- Along secure paths around the home’s exterior
- Terminating at the outdoor Peso WiFi system
The termination points were tested with proper network tools to ensure signal integrity and reliability before finalizing the installation. This allowed the Peso WiFi device to distribute Starlink’s internet connection to a broader area, potentially serving nearby homes or passersby.
Challenges and Mitigation
Several challenges were encountered throughout the project, which were carefully mitigated:
- Remote Location: The installation site was not easily accessible, requiring travel by boat and road over considerable distances. This was addressed through pre-trip planning and carrying all necessary tools and backups.
- Limited Cellular Signal: The mountainous terrain had poor cellular reception, which could hinder online configuration. Our team prepared by caching required firmware updates and using offline tools where possible.
- Weather Considerations: Being a rooftop installation, weather posed a risk. The installation was scheduled during a clear weather window, and the mounting process included the use of waterproof seals and corrosion-resistant hardware.
Client Benefits and Outcomes
Upon completion of the installation, the client was able to immediately access the internet through Starlink’s satellite network. The performance tests showed:
- Download Speeds ranging between 80 to 120 Mbps
- Upload Speeds between 10 to 20 Mbps
- Latency as low as 40ms, making it usable for video calls, streaming, and online work
With the Peso WiFi system connected via shielded cabling, the internet signal could now be distributed to nearby users, helping serve the broader community.
This project represents more than just a technological upgrade. For the residents of that area in Getafe, it’s a leap forward in terms of communication, education, and access to global resources. The ability to attend online classes, conduct business remotely, access telehealth services, or simply stay connected with loved ones can now be taken for granted—something not possible before this installation.
Why Starlink?
Traditional ISPs rely on ground-based infrastructure like fiber or towers, which are often impractical in mountainous or remote regions. Starlink, however, uses a constellation of low-Earth-orbit (LEO) satellites that beam internet directly to user terminals.
Advantages of Starlink in remote settings include:
- Rapid Deployment: No need to wait for fiber trenching or tower construction.
- High Speeds: Comparable to urban broadband services.
- Mobility: Starlink can be moved and set up at new sites if needed (with proper reconfiguration).
- Low Latency: Because of its LEO satellite network, latency is significantly lower than traditional satellite internet systems.
This installation demonstrates Starlink’s effectiveness as a long-term solution for digital inclusion in rural Philippines.
Conclusion
The Starlink installation project in Getafe, Bohol is a testament to Installersph IT Solutions’ commitment to delivering dependable internet solutions, even in the most remote and challenging locations. From traveling across islands to scaling rooftops in mountainous terrain, our team ensured that every aspect of the installation—from mounting the satellite dish to configuring the system and routing shielded cabling—was handled with professionalism and precision.
With this installation, our client now benefits from a reliable, high-speed internet connection that supports both personal and extended community use through the Peso WiFi system. This project reinforces the value of Starlink technology in bridging the digital divide and showcases our ability to execute high-impact solutions in underserved areas.
At Installersph IT Solutions, providing you with a brighter tomorrow.
Case Studies
Price Verifier | Checker Demonstration at Atlantic Hardware. Introduction In an age where time and efficiency define the quality of customer experience, businesses—especially in the retail sector—are looking for every possible edge …
CCTV Supply and Installation at University of Visayas Maritime Training Center. Introduction In today’s world, security and surveillance are paramount to ensuring the safety of institutions, businesses, and residential properties. As part …